@article {07_IEEEMWCL_Ruiz-CruzZhangZakiEtAl_Ultra-WidebandLTCCRidge,
	title = {Ultra-Wideband LTCC Ridge Waveguide Filters},
	journal = {IEEE Microwave and Wireless Components Letters},
	volume = {17},
	number = {2},
	year = {2007},
	month = {Feb.},
	pages = {115-117},
	abstract = {The design and experimental validation of an ultra-wideband (UWB) filter in a low temperature co-fired ceramic (LTCC) is presented. The bandpass filter uses ridge waveguide resonators realized in LTCC by printing parallel planar conductors for the top and bottom walls and closely spaced metal filled vias for the lateral walls. Filter coupling scheme and stripline transitions are developed for the UWB requirement. The mode-matching method is used in their design. The LTCC via effect and the measurement setup are also addressed. Finally, experimental results of a nine-order filter (design passband from 3 to 9GHz) are presented},
	keywords = {band-pass filters, bandpass filter, filter coupling scheme, low temperature co fired ceramic, LTCC, metal filled vias, mode matching method, nine order filter, planar conductors, ridge waveguide filters, ridge waveguide resonators, ridge waveguides, stripline transitions, ultra wideband filter, waveguide filters3 to 9 GHz},
	issn = {1531-1309},
	doi = {10.1109/LMWC.2006.890333},
	url = {http://ieeexplore.ieee.org/iel5/7260/4079621/04079639.pdf?tp=\&isnumber=4079621\&arnumber=4079639\&punumber=7260},
	author = {J A Ruiz-Cruz and Zhang, Y and Zaki, K A and Piloto, A J and Tallo, J}
}
@conference {06_IMS_ZhangRuiz-CruzZaki_RidgeWaveguideDivider,
	title = {Ridge Waveguide Divider Junctions for Wide-Band Multiplexer Applications},
	booktitle = {2006 IEEE MTT-S International Microwave Symposium Digest},
	year = {2006},
	month = {June},
	pages = {1225-1228},
	abstract = {Ridge waveguide divider junctions are introduced and applied to wide-band multiplexer applications. A rigorous analysis and optimization process by mode matching method (MMM) is employed to design the junctions that yield low reflection coefficient in common port and almost equal transmission coefficients in the other two ports over a wide frequency band. Two design examples of wide-band diplexer and triplexer using such junctions are presented. All the components involved in the diplexer/triplexer designs are rigorously modeled and cascaded by MMM. Optimization procedures by MMM are also applied in these two designs to improve the performance. Multiplexers using such junctions can be built in either metallic form or low-temperature co-fired ceramic (LTCC) technology},
	keywords = {low-temperature co-fired ceramics, mode matching, mode matching method, multiplexing equipment, ridge waveguide divider junctions, ridge waveguides, waveguide junctionsLTCC technology, wide-band diplexer, wide-band multiplexer applications, wide-band triplexer},
	issn = {0149-645X},
	doi = {10.1109/MWSYM.2006.249431},
	url = {http://ieeexplore.ieee.org/iel5/4014788/4014789/04015143.pdf?tp=\&isnumber=\&arnumber=4015143},
	author = {Zhang, Y and J A Ruiz-Cruz and Zaki, K A}
}
@conference {06_EuMC_Ruiz-CruzZhangFahmiEtAl_RidgeWaveguideElliptic,
	title = {Ridge Waveguide Elliptic Filters in Narrow-Wall Canonical Configuration},
	booktitle = {Proc. 36th European Microwave Conference},
	year = {2006},
	month = {Sept.},
	pages = {1080-1082},
	abstract = {A new canonical ridge waveguide structure is proposed to design elliptic filter responses. The non-adjacent cavities are coupled by windows situated at the common narrow-wall of the ridge waveguide enclosures. This new configuration provides positive and negative cross couplings using evanescent rectangular waveguides and metallic strips, respectively. The full-wave analysis of the structure is carried out by a rigorous mode matching method. The design is based on circuit synthesis and full-wave optimization. Finally, the proposed structure is elucidated with the design of a four-pole filter and it is validated with the commercial HFSS software},
	keywords = {circuit synthesis, elliptic filters, four-pole filter, full-wave optimization, metallic strips, mode matching, mode matching method, narrow-wall canonical configuration, negative cross couplings, network synthesis, nonadjacent cavities, positive cross couplings, rectangular waveguides, ridge waveguide elliptic filters, ridge waveguides, waveguide filtersHFSS software},
	issn = {2-9600551-6-0},
	doi = {10.1109/EUMC.2006.281121},
	url = {http://ieeexplore.ieee.org/iel5/4057701/4057702/04058011.pdf?tp=\&isnumber=\&arnumber=4058011},
	author = {J A Ruiz-Cruz and Zhang, Y and Fahmi, M M and Zaki, K A}
}
