@article {07_IEEEMWCL_Ruiz-CruzZhangZakiEtAl_Ultra-WidebandLTCCRidge,
	title = {Ultra-Wideband LTCC Ridge Waveguide Filters},
	journal = {IEEE Microwave and Wireless Components Letters},
	volume = {17},
	number = {2},
	year = {2007},
	month = {Feb.},
	pages = {115-117},
	abstract = {The design and experimental validation of an ultra-wideband (UWB) filter in a low temperature co-fired ceramic (LTCC) is presented. The bandpass filter uses ridge waveguide resonators realized in LTCC by printing parallel planar conductors for the top and bottom walls and closely spaced metal filled vias for the lateral walls. Filter coupling scheme and stripline transitions are developed for the UWB requirement. The mode-matching method is used in their design. The LTCC via effect and the measurement setup are also addressed. Finally, experimental results of a nine-order filter (design passband from 3 to 9GHz) are presented},
	keywords = {band-pass filters, bandpass filter, filter coupling scheme, low temperature co fired ceramic, LTCC, metal filled vias, mode matching method, nine order filter, planar conductors, ridge waveguide filters, ridge waveguide resonators, ridge waveguides, stripline transitions, ultra wideband filter, waveguide filters3 to 9 GHz},
	issn = {1531-1309},
	doi = {10.1109/LMWC.2006.890333},
	url = {http://ieeexplore.ieee.org/iel5/7260/4079621/04079639.pdf?tp=\&isnumber=4079621\&arnumber=4079639\&punumber=7260},
	author = {J A Ruiz-Cruz and Zhang, Y and Zaki, K A and Piloto, A J and Tallo, J}
}
@conference {05_IMS_FahmiRuiz-CruzZakiEtAl_LTCCwide-bandcanonical,
	title = {LTCC wide-band canonical ridge waveguide filters},
	booktitle = {2005 IEEE MTT-S International Microwave Symposium Digest},
	year = {2005},
	month = {June},
	pages = {249-252},
	abstract = {A canonical LTCC ridge waveguide filter for wide-band application is proposed. A new coupling scheme is employed to achieve the values of the cross couplings needed to increase the bandwidth. The change of the realization of the coupling sections from rectangular to narrow ridge waveguide is shown to eliminate detrimental undesired cross coupling. To validate the concept, rigorous mode matching method is used for full-wave analysis and optimization of a six pole filter. The response is verified with another numerical method, and a prototype is constructed for testing.},
	keywords = {canonical ridge waveguide filters, ceramic packaging, coupling scheme, coupling sections, full-wave analysis, mode matching, mode matching method, narrow ridge waveguide, optimisation, ridge waveguides, six pole filter, waveguide filters LTCC, wide-band filters},
	issn = {01490-645X},
	doi = {10.1109/MWSYM.2005.1516572},
	url = {http://ieeexplore.ieee.org/iel5/10171/32491/01516572.pdf?tp=\&isnumber=\&arnumber=1516572},
	author = {Fahmi, M M and J A Ruiz-Cruz and Zaki, K A and Piloto, A J}
}
