@article {12_IEEEMWCL_Leal-SevillanoMontejo-GaraiRuiz-CruzEtAl_Low-LossEllipticalResponse,
	title = {Low-Loss Elliptical Response Filter at 100 GHz},
	journal = {Microwave and Wireless Components Letters, IEEE},
	volume = {22},
	number = {9},
	year = {2012},
	month = {September},
	pages = {459 -461},
	abstract = {The design, method of fabrication and experimental validation of a pseudo-elliptical four-poles asymmetric response filter at 100 GHz with 10\% of fractional bandwidth is presented. The designed filter is part of an image radar system and must fulfill stringent specifications. The proposed topology and method of fabrication improves the out of band rejection above the pass band in comparison with other classical structures, while keeping a low insertion loss level. A two-fold geometry for implementing a transmission zero is proposed, avoiding the excitation of the first higher order mode and easing the manufacturing without any tuning element. A low-cost milling process is used for the fabrication of the device. The final design fulfills the desired specifications and presents 0.6 dB of insertion loss level at 100 GHz. The excellent agreement between simulations and measurements at this frequency band in both, return loss and insertion loss, is pointed out.},
	keywords = {Asymmetric, band-pass filters, elliptic filters, extracted pole, Fabrication, fabrication method, filter, filtering theory, fractional bandwidth, frequency 100 GHz, higher order mode, image radar system, Insertion loss, loss 0.6 dB, Loss measurement, low insertion loss level, low loss, low-cost milling process, low-loss elliptical response filter, microwave filters, millimetre wave filters, Milling, out of band rejection, pseudo-elliptical four-poles asymmetric response filter, Radar, return loss, transmission zero, two-fold geometry, W-band},
	issn = {1531-1309},
	doi = {10.1109/LMWC.2012.2212237},
	url = {http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6268297\&tag=1},
	author = {C A Leal-Sevillano and Montejo-Garai, J R and J A Ruiz-Cruz and Rebollar, J M}
}
@conference {06_EuMC_Montejo-GaraiRuiz-CruzRebollarEtAl_DesignofSelf-Equalised,
	title = {Design of Self-Equalised Elliptic Filter Channels in Ka-Band Implemented in Rectangular H-Plane Waveguide},
	booktitle = {Proc. 36th European Microwave Conference},
	year = {2006},
	month = {Sept.},
	pages = {1087-1090},
	abstract = {In this article, a systematic design procedure for the design of self-equalised elliptic filters in H-plane configuration is presented. Such a configuration in tends to be an alternative to the classical dual-mode circular waveguide configuration in Ka band, with the aim in mind of reducing cost and computation time. In order to decrease the insertion loss the TE105 will be used. A sixth order filter with two transmission zeros at finite real frequencies and two zeros for equalisation has been designed, manufactured and measured. The results make clear the validity of the proposed configuration},
	keywords = {dual mode circular waveguide, elliptic filter channels, elliptic filters, Ka-band, microwave filters, Milling, mode matching, poles and zeros, rectangular waveguide, rectangular waveguides, self-equalised filter, systematic design procedure, waveguide filtersH-plane configuration},
	issn = {2-9600551-6-0},
	doi = {10.1109/EUMC.2006.281123},
	url = {http://ieeexplore.ieee.org/iel5/4057701/4057702/04058013.pdf?tp=\&isnumber=\&arnumber=4058013},
	author = {Montejo-Garai, J R and J A Ruiz-Cruz and Rebollar, J M and Onoro-Navarro, A. and Hidalgo-Carpintero, I and Padilla-Cruz, M J}
}
@conference {05_IMS_Ruiz-CruzZakiMontejo-GaraiEtAl_Rectangularwaveguideelliptic,
	title = {Rectangular waveguide elliptic filters with capacitive and inductive irises and integrated coaxial excitation},
	booktitle = {2005 IEEE MTT-S International Microwave Symposium Digest},
	year = {2005},
	month = {June},
	pages = {269-272},
	abstract = {CAD of rectangular waveguide filters with elliptic responses is described. The configuration uses capacitive and inductive irises in order to achieve the different coupling signs required to synthesize finite transmission zeros in the rejection bands. The input and output ports are realized by a coaxial probe that directly excites the input/output cavities. The analysis is done by the efficient mode-matching method, in order to allow a final full-wave optimization taking into account all the higher order mode interactions. The CAD results are verified with the HFSS and a filter was manufactured for testing.},
	keywords = {band-stop filters, capacitive iris, circuit CAD, coaxial probe, coaxial waveguides, elliptic filters, finite transmission zeros, full-wave optimization, higher order mode interactions, inductive iris, input ports, integrated coaxial excitation, mode matching, mode-matching method, optimisation, output ports, rectangular waveguide filter, rectangular waveguides, rejection bands, waveguide filters CAD},
	issn = {01490-645X},
	doi = {10.1109/MWSYM.2005.1516577},
	url = {http://ieeexplore.ieee.org/iel5/10171/32491/01516577.pdf?tp=\&isnumber=\&arnumber=1516577},
	author = {J A Ruiz-Cruz and Zaki, K A and Montejo-Garai, J R and Rebollar, J M}
}
