@article {08_IJRFMiCAE_Ruiz-CruzMontejo-GaraiRebollar_Full-wavemodelingand,
	title = {Full-wave modeling and optimization of Boifot junction ortho-mode transducers},
	journal = {International Journal of RF and Microwave Computer-Aided Engineering},
	volume = {18},
	number = {4},
	year = {2008},
	month = {July},
	pages = {303-313},
	abstract = {The full-wave design of broadband ortho-mode transducers based on the Boifot junction has two main aspects: an efficient analysis method and a design process divided into tasks with relatively low computational effort. In the analysis part, a rigorous mode-matching technique has been developed to obtain the generalized admittance matrix of the Boifot junction. The other elements of the device are also analyzed by mode-matching. With respect to the design, the proposed procedure starts with the optimization of the individual building blocks of the device. Their interaction is also taken into account in a systematic process. The analysis and design methods have been validated with other numerical methods and an experimental prototype},
	keywords = {Boifot ortho-mode transducer, full-wave optimization, generalized admittance matrix, mode-matching},
	issn = {1096-4290},
	doi = {10.1002/mmce.20287},
	url = {http://www3.interscience.wiley.com/cgi-bin/fulltext/119140992/PDFSTART},
	author = {J A Ruiz-Cruz and Montejo-Garai, J R and Rebollar, J M}
}
@article {05_IEEETMTT_Ruiz-CruzSabbaghZakiEtAl_Canonicalridgewaveguide,
	title = {Canonical ridge waveguide filters in LTCC or metallic resonators},
	journal = {IEEE Transactions on Microwave Theory and Techniques},
	volume = {53},
	number = {1},
	year = {2005},
	month = {Jan.},
	pages = {174-182},
	abstract = {A new physical realization of an elliptic function filter response is proposed for achieving compact size, wide bandwidth, wide spurious free stopband and high-selectivity performance. The filter configuration can be implemented in conventional waveguide technology or embedded in a multilayer low-temperature co-fired ceramic structure for integration with other circuitry in a chip module. The filter is analyzed using rigorous mode matching. To validate the concept, prototypes of four- and six-cavity elliptic filters are designed following a systematic procedure. Approximate synthesis is used to obtain initial dimensions of the filter and the desired optimum response is obtained by means of a final full-wave optimization. The results are verified with other numerical methods and with the measurements of a fourth-order waveguide filter.},
	keywords = {band-pass filters, canonical ridge waveguide filters, cavity resonator filters, ceramics, chip module, circuit optimisation, elliptic filters, elliptic function filter response, four cavity elliptic filters design, fourth order waveguide filter, full-wave optimization, metallic resonators, microwave filters, mode matching, multilayer low temperature cofired ceramic structure, multilayers, numerical methods, prototypes, resonators, ridge waveguides, six cavity elliptic filters design, spurious free stopband filter, waveguide filters band pass filters, waveguide technology},
	issn = {0018-9480},
	doi = {10.1109/TMTT.2004.839324},
	url = {http://ieeexplore.ieee.org/iel5/22/30125/01381687.pdf?tp=\&arnumber=1381687\&isnumber=30125},
	author = {J A Ruiz-Cruz and El Sabbagh, M A and Zaki, K A and Rebollar, J M and Zhang, Y}
}
@conference {05_IMS_Ruiz-CruzZakiMontejo-GaraiEtAl_Rectangularwaveguideelliptic,
	title = {Rectangular waveguide elliptic filters with capacitive and inductive irises and integrated coaxial excitation},
	booktitle = {2005 IEEE MTT-S International Microwave Symposium Digest},
	year = {2005},
	month = {June},
	pages = {269-272},
	abstract = {CAD of rectangular waveguide filters with elliptic responses is described. The configuration uses capacitive and inductive irises in order to achieve the different coupling signs required to synthesize finite transmission zeros in the rejection bands. The input and output ports are realized by a coaxial probe that directly excites the input/output cavities. The analysis is done by the efficient mode-matching method, in order to allow a final full-wave optimization taking into account all the higher order mode interactions. The CAD results are verified with the HFSS and a filter was manufactured for testing.},
	keywords = {band-stop filters, capacitive iris, circuit CAD, coaxial probe, coaxial waveguides, elliptic filters, finite transmission zeros, full-wave optimization, higher order mode interactions, inductive iris, input ports, integrated coaxial excitation, mode matching, mode-matching method, optimisation, output ports, rectangular waveguide filter, rectangular waveguides, rejection bands, waveguide filters CAD},
	issn = {01490-645X},
	doi = {10.1109/MWSYM.2005.1516577},
	url = {http://ieeexplore.ieee.org/iel5/10171/32491/01516577.pdf?tp=\&isnumber=\&arnumber=1516577},
	author = {J A Ruiz-Cruz and Zaki, K A and Montejo-Garai, J R and Rebollar, J M}
}
@conference {05_IMS_Ruiz-CruzZhangZakiEtAl_Ridgewaveguidebranch-line,
	title = {Ridge waveguide branch-line directional couplers for wideband applications and LTCC technology},
	booktitle = {2005 IEEE MTT-S International Microwave Symposium Digest},
	year = {2005},
	month = {June},
	pages = {1219-1222},
	abstract = {A new branch-line directional coupler is proposed for achieving wide bandwidth. The device is implemented in ridge waveguide to exploit its wide monomode band. It can be physically realized either in empty ridge waveguide or in LTCC for integration in a chip module. Two prototypes of two and five branches are designed following a systematic procedure. An appropriate equivalent circuit provides initial dimensions and the desired optimum response is obtained by means of a final full-wave optimization based on the rigorous and efficient mode-matching method. The results are verified with the finite element method of the HFSS software and a prototype will be manufactured for testing},
	keywords = {branch-line directional couplers, chip module integration, directional couplers, equivalent circuits, finite element analysis, finite element method, full-wave optimization, mode matching, mode-matching method, optimisation, ridge waveguides, ridge waveguidesLTCC technology, wide monomode band},
	issn = {01490-645X},
	doi = {10.1109/MWSYM.2005.1516896},
	url = {http://ieeexplore.ieee.org/iel5/10171/32491/01516896.pdf?tp=\&isnumber=\&arnumber=1516896},
	author = {J A Ruiz-Cruz and Zhang, Y and Zaki, K A and Piloto, A J and Rebollar, J M}
}
@conference {04_IMS_Ruiz-CruzElZakiEtAl_Full-wavedesignof,
	title = {Full-wave design of canonical ridge waveguide filters},
	booktitle = {2004 IEEE MTT-S International Microwave Symposium Digest},
	volume = {2},
	year = {2004},
	month = {June},
	pages = {603-606},
	abstract = {A new physical realization of an elliptic function filter response is proposed for achieving compact size, wide bandwidth, wide spurious free stop band and high selectivity performance. The canonical ridge waveguide filter configuration is analyzed using rigorous mode-matching. To validate the concept, a prototype that realizes the coupling matrix of a canonical four cavity elliptic filter is designed following a systematic procedure. Approximate synthesis is used to obtain initial dimensions of the filter and the desired optimum response is obtained by means of a final full-wave optimization. The results are verified with other numerical method and a prototype will be built for testing.},
	keywords = {band-pass filters, coupling matrix, elliptic filters, elliptic function filter, filtering theory, full-wave design, full-wave optimization, mode matching, mode-matching, waveguide filters canonical ridge waveguide filters, wide bandwidth, wide spurious free stop band},
	issn = {0149-645X},
	doi = {10.1109/MWSYM.2004.1336056},
	url = {http://ieeexplore.ieee.org/iel5/9277/29472/01336056.pdf?tp=\&isnumber=\&arnumber=1336056},
	author = {J A Ruiz-Cruz and El Sabbagh, M A and Zaki, K A and Rebollar, J M}
}
