@conference {06_EuMC_Montejo-GaraiRuiz-CruzRebollarEtAl_DesignofSelf-Equalised,
	title = {Design of Self-Equalised Elliptic Filter Channels in Ka-Band Implemented in Rectangular H-Plane Waveguide},
	booktitle = {Proc. 36th European Microwave Conference},
	year = {2006},
	month = {Sept.},
	pages = {1087-1090},
	abstract = {In this article, a systematic design procedure for the design of self-equalised elliptic filters in H-plane configuration is presented. Such a configuration in tends to be an alternative to the classical dual-mode circular waveguide configuration in Ka band, with the aim in mind of reducing cost and computation time. In order to decrease the insertion loss the TE105 will be used. A sixth order filter with two transmission zeros at finite real frequencies and two zeros for equalisation has been designed, manufactured and measured. The results make clear the validity of the proposed configuration},
	keywords = {dual mode circular waveguide, elliptic filter channels, elliptic filters, Ka-band, microwave filters, Milling, mode matching, poles and zeros, rectangular waveguide, rectangular waveguides, self-equalised filter, systematic design procedure, waveguide filtersH-plane configuration},
	issn = {2-9600551-6-0},
	doi = {10.1109/EUMC.2006.281123},
	url = {http://ieeexplore.ieee.org/iel5/4057701/4057702/04058013.pdf?tp=\&isnumber=\&arnumber=4058013},
	author = {Montejo-Garai, J R and J A Ruiz-Cruz and Rebollar, J M and Onoro-Navarro, A. and Hidalgo-Carpintero, I and Padilla-Cruz, M J}
}
@conference {04_APS_Ruiz-CruzZakiRebollar_Mode-matchinganalysisof,
	title = {Mode-matching analysis of a coaxial-to-stripline discontinuity applied to the modeling of a coaxial probe},
	booktitle = {Proc. 2004 IEEE Antennas and Propagation Society International Symposium},
	volume = {2},
	year = {2004},
	month = {June},
	pages = {2139-2142},
	abstract = {The paper presents the analysis of the discontinuity between a coaxial and a generalized stripline waveguide and its application to the characterization of a probe inside a rectangular waveguide. The probe is modeled by a stripline whose inner conductor is stepped. For thin probes, just a reduced number of sections is needed and its characterization can be obtained very efficiently. The mode-matching technique is employed for analyzing the basic discontinuity, and the inner cross products between the modes are computed by means of the Bessel-Fourier series, reducing the computation time with respect to a pure numerical integration. The simulation results are compared with those obtained by other numerical techniques.},
	keywords = {coaxial probe modeling, coaxial waveguide, coaxial waveguides, coaxial-to-stripline discontinuity, computation time, Fourier series, mode matching, mode-matching analysis, numerical integration, rectangular waveguide, strip line discontinuities Bessel-Fourier series, stripline waveguide},
	issn = {0-7803-8302-8},
	doi = {10.1109/APS.2004.1330633},
	url = {http://ieeexplore.ieee.org/iel5/9253/29356/01330633.pdf?tp=\&isnumber=\&arnumber=1330633},
	author = {J A Ruiz-Cruz and Zaki, K A and Rebollar, J M}
}
