@conference {19_IMWS_AMP_EDUARDO_INKJET_PATCH_MALAGA,
	title = {Ink-jet Implementation of Stacked-Patch Antenna for Wireless Applications},
	booktitle = {2019 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP)},
	year = {2019},
	month = {July},
	pages = {151-153},
	keywords = {antenna bandwidth, Antenna measurements, Antennas, Bandwidth, conductive silver ink, dielectric materials, frequency 5.0 GHz, high-impact polystyrene substrate, Hip, ink jet printing, ink-jet implementation, ink-jet printing, Kapton film, Kapton layer, mechanical stability, microstrip, Microstrip antennas, microstrip lines, Patch antennas, silver, stacked-patch antenna, Substrates, Three-dimensional printing, wireless applications, Wireless LAN},
	issn = {null},
	doi = {10.1109/IMWS-AMP.2019.8880078},
	author = {E Garcia-Marin and E M{\'a}rquez-Segura and P Sanchez-Olivares and J L Masa-Campos and J A Ruiz-Cruz and C Camacho-Pe{\~n}alosa}
}
@article {18_COMM_MAG_EDUARDO_DIFF_BONDING1,
	title = {Diffusion Bonding Manufacturing of High Gain W-Band Antennas for 5G Applications},
	journal = {IEEE Communications Magazine},
	volume = {56},
	number = {7},
	year = {2018},
	month = {July},
	pages = {21-27},
	abstract = {The incoming 5G systems propose unprecedented communication capabilities that require a maximization of the channel and spectrum exploitation. Waveguide antenna arrays can play an important role in 5G environments due to their high performance in terms of efficiency and bandwidth. Moreover, higher frequencies appear necessary in order to achieve the requirements of channel capacity and spectrum bandwidth. At millimeter-wave frequencies, new challenges for the design and fabrication of the communication devices are encountered. The feasibility of traditional manufacturing techniques and conventional additive manufacturing processes severely decreases, since part tolerances, assembly, and alignment become critical for the antenna performance. In order to illustrate the possibilities of the diffusion bonding technique applied to waveguide antennas operating in the W-band of 5G systems, a circularly polarized cavity array has been successfully manufactured. This manufacturing process provides the advantages of both traditional and additive manufacturing. A 5.6 percent effective bandwidth at 90 GHz has been experimentally obtained with reflected power under 10 percent, axial ratio below 3 dB, and antenna efficiency over 50 percent.},
	keywords = {5G mobile communication, Antenna arrays, Diffusion bonding, Three-dimensional printing},
	issn = {0163-6804},
	doi = {10.1109/MCOM.2018.1700986},
	author = {E Garcia-Marin and J L Masa-Campos and P Sanchez-Olivares}
}
@article {18_AWPL_EDUARDO-GARCIA_EVALUATION_ADD_MANUF,
	title = {Evaluation of Additive Manufacturing Techniques Applied to Ku-Band Multilayer Corporate Waveguide Antennas},
	journal = {IEEE Antennas and Wireless Propagation Letters},
	volume = {17},
	number = {11},
	year = {2018},
	month = {Nov},
	pages = {2114-2118},
	keywords = {additive manufacturing techniques, Antenna arrays, antenna feeds, antenna layers, antenna prototypes, Aperture antennas, axial ratio, conventional milling, corporate-fed waveguide array antenna, digital communication, direct broadcasting by satellite, direct metal laser sintering, DMLS antenna, electrical performance, end-user digital broadcast satellite communications, gain ratio, impedance matching, intricate multilayer structure, Ku-band multilayer corporate waveguide antennas, laser sintering, layered manufacturing, Metals, Milling, multilayer structure, multilayers, Planar arrays, prototypes, rapid prototyping (industrial), reference prototype, reliability, satellite antennas, single block fabrication, slot antenna arrays, stereolithography, Three-dimensional printing, waveguide antenna implementation},
	issn = {1536-1225},
	doi = {10.1109/LAWP.2018.2866631},
	author = {E Garcia-Marin and J L Masa-Campos and P Sanchez-Olivares and J A Ruiz-Cruz}
}
