@article {19_ANT_MAG_PABLO_PAULA_CONFORMADA_DIODOSPIN_3_5GHZ,
	title = {Circular Conformal Array Antenna With Omnidirectional and Beamsteering Capabilities for 5G Communications in the 3.5-GHz Range [Wireless Corner]},
	journal = {IEEE Antennas and Propagation Magazine},
	volume = {61},
	number = {4},
	year = {2019},
	month = {Aug},
	pages = {97-108},
	keywords = {5G communications, 5G mobile communication, 5G terrestrial communications, Antenna arrays, antenna radiation patterns, array elements, array signal processing, Beam steering, circular conformal array antenna, Conformal antenna, Conformal antennas, conformal structure, double-stacked microstrip patches, eight-way tunable feeding network, frequency 3.5 GHz, Frequency measurement, microstrip, microstrip antenna arrays, octagonal holding structure, omnidirectional antennas, omnidirectional radiation, P-i-n diodes, Power dividers, single radiating elements, T-junction operation modes, TFN network, tunable T-junctions},
	issn = {1558-4143},
	doi = {10.1109/MAP.2019.2920049},
	author = {P Sanchez-Olivares and P Sanchez-Dancausa and J L Masa-Campos and M Iglesias-Menendez-de-la-Vega and E Garcia-Marin}
}
@conference {19_IMWS_AMP_EDUARDO_INKJET_PATCH_MALAGA,
	title = {Ink-jet Implementation of Stacked-Patch Antenna for Wireless Applications},
	booktitle = {2019 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP)},
	year = {2019},
	month = {July},
	pages = {151-153},
	keywords = {antenna bandwidth, Antenna measurements, Antennas, Bandwidth, conductive silver ink, dielectric materials, frequency 5.0 GHz, high-impact polystyrene substrate, Hip, ink jet printing, ink-jet implementation, ink-jet printing, Kapton film, Kapton layer, mechanical stability, microstrip, Microstrip antennas, microstrip lines, Patch antennas, silver, stacked-patch antenna, Substrates, Three-dimensional printing, wireless applications, Wireless LAN},
	issn = {null},
	doi = {10.1109/IMWS-AMP.2019.8880078},
	author = {E Garcia-Marin and E M{\'a}rquez-Segura and P Sanchez-Olivares and J L Masa-Campos and J A Ruiz-Cruz and C Camacho-Pe{\~n}alosa}
}
@article {19_ANT_MAG_EDUARDO_5G_SIW,
	title = {Planar Array Topologies for 5G Communications in Ku Band [Wireless Corner]},
	journal = {IEEE Antennas and Propagation Magazine},
	volume = {61},
	number = {2},
	year = {2019},
	month = {April},
	pages = {112-133},
	keywords = {5G communication environment, 5G communications, 5G mobile communication, antenna array, Antenna arrays, antenna feeds, antenna radiation patterns, dielectric losses, directivity performance, feeding network configurations, Ku band, microstrip, microstrip antenna arrays, Microstrip antennas, microstrip dielectric loss, planar antenna arrays, planar array topologies, radiating elements, SIW feeding network, SIW technologies, substrate integrated waveguide, substrate integrated waveguides, Substrates, two-level corporate feeding network},
	issn = {1558-4143},
	doi = {10.1109/MAP.2019.2895633},
	author = {E. Garcia-Marin and J. L. Masa-Campos and P. Sanchez-Olivares}
}
@article {19_ANT_MAG_EDUARDO_5G_SIW,
	title = {Planar Array Topologies for 5G Communications in Ku Band [Wireless Corner]},
	journal = {IEEE Antennas and Propagation Magazine},
	volume = {61},
	number = {2},
	year = {2019},
	month = {April},
	pages = {112-133},
	keywords = {5G communication environment, 5G communications, 5G mobile communication, antenna array, Antenna arrays, antenna feeds, antenna radiation patterns, dielectric losses, directivity performance, feeding network configurations, Ku band, microstrip, microstrip antenna arrays, Microstrip antennas, microstrip dielectric loss, planar antenna arrays, planar array topologies, radiating elements, SIW feeding network, SIW technologies, substrate integrated waveguide, substrate integrated waveguides, Substrates, two-level corporate feeding network},
	issn = {1558-4143},
	doi = {10.1109/MAP.2019.2895633},
	author = {E Garcia-Marin and J L Masa-Campos and P Sanchez-Olivares}
}
@conference {17_EUCAP_EDUARDOGARCIA_4x4_stackedPatch_eucap,
	title = {Implementation of 4 {\texttimes} 4 stacked patch array with corporate feeding network for Ku-band applications},
	booktitle = {Antennas and Propagation (EUCAP), 2017 11th European Conference on},
	year = {2017},
	month = {March},
	pages = {1967-1971},
	abstract = {In this work, the experimental implementation of a 4 x 4 stacked-patch array with linear polarization and a corporate feeding network for Ku-band is exposed. The feeding network is split into two levels, with an initial power distribution in Substrate Integrated Waveguide and a second distribution in microstrip technology. The experimental results show a matching coefficient better than -10 dB in a 15.9\% bandwidth. In addition, the measured gain attains 16.8 dBi, 0.8 dB below the simulated gain, while radiation efficiency is 66 \%. The structure is validated for higher-gain arrays, and hence designs of 8 x 8 and 16 x 16 radiating elements are also proposed and the simulated results presented. Therefore, antennas with several gain values are available in order to suit the different elements of the communication system, such as the end user and the base station.},
	keywords = {antenna, array, corporate feeding, linear polarization, microstrip, replication., SIW, stacked patch},
	doi = {10.23919/EuCAP.2017.7928530},
	url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=\&arnumber=7928530},
	author = {E Garcia-Marin and J L Masa-Campos and P Sanchez-Olivares}
}
@conference {16_EUCAP_EDUARDOGARCIA_patcharray4x4,
	title = {4 {\texttimes} 4 stacked patch array with siw and microstrip corporate feeding network for ku-band},
	booktitle = {Antennas and Propagation (EUCAP), 2016 10th European Conference on},
	year = {2016},
	month = {April},
	pages = {1-4},
	abstract = {A 4 {\texttimes} 4 linearly-polarized stacked-patch array with a fully corporate feeding network for Ku-band is presented in its work. Antenna replication in larger arrays is straightforward with this corporate approach, which in addition prevents unintended main beam steering. The feeding structure is divided in two levels, where the first power distribution is made in Substrate Integrated Waveguide and the second in microstrip technology. This procedure takes advantage of the strengths of each technology, combining waveguide low losses with microstrip versatility. A 18.4-dBi gain is attained in simulation with matching better than -14 dB in the entire bandwidth.},
	keywords = {antenna, array, corporate feeding, linear polarization, microstrip, replication, SIW, stacked patch},
	author = {E Garcia-Marin and J L Masa-Campos and P Sanchez-Olivares}
}
@article {13_JEMWA_Leal-SevillanoMontejo-GaraiRuiz-CruzEtAl_ExperimentalcomparisonofWBandFilters,
	title = {Experimental comparison of waveguide filters at W-band implemented by different machining processes and split-block},
	journal = {Journal of Electromagnetic Waves and Applications},
	volume = {27},
	number = {18},
	year = {2013},
	month = {Oct},
	pages = {2390-2394},
	abstract = {The aim of this work is to explore different machining processes and different split-block, getting important experimental information for the design of passive waveguide components at W-band. To this end, two all-pole response filters are machined by different techniques: electro-discharge and milling, and split-block: H-plane and E-plane. Some interesting results, obtained in the design, fabrication, and measure of waveguide filters at W-band, such as tolerances of the different processes and level of insertion loss, are reported.},
	keywords = {antena de parche, microstrip, ranura, red de alimentaci{\'o}n},
	issn = {0920-5071},
	doi = {http://dx.doi.org/10.1080/09205071.2013.851011},
	author = {C A Leal-Sevillano and Montejo-Garai, J R, and J A Ruiz-Cruz and Rebollar, J M}
}
