@article {19_ANT_MAG_EDUARDO_5G_SIW,
	title = {Planar Array Topologies for 5G Communications in Ku Band [Wireless Corner]},
	journal = {IEEE Antennas and Propagation Magazine},
	volume = {61},
	number = {2},
	year = {2019},
	month = {April},
	pages = {112-133},
	keywords = {5G communication environment, 5G communications, 5G mobile communication, antenna array, Antenna arrays, antenna feeds, antenna radiation patterns, dielectric losses, directivity performance, feeding network configurations, Ku band, microstrip, microstrip antenna arrays, Microstrip antennas, microstrip dielectric loss, planar antenna arrays, planar array topologies, radiating elements, SIW feeding network, SIW technologies, substrate integrated waveguide, substrate integrated waveguides, Substrates, two-level corporate feeding network},
	issn = {1558-4143},
	doi = {10.1109/MAP.2019.2895633},
	author = {E. Garcia-Marin and J. L. Masa-Campos and P. Sanchez-Olivares}
}
@article {19_ANT_MAG_EDUARDO_5G_SIW,
	title = {Planar Array Topologies for 5G Communications in Ku Band [Wireless Corner]},
	journal = {IEEE Antennas and Propagation Magazine},
	volume = {61},
	number = {2},
	year = {2019},
	month = {April},
	pages = {112-133},
	keywords = {5G communication environment, 5G communications, 5G mobile communication, antenna array, Antenna arrays, antenna feeds, antenna radiation patterns, dielectric losses, directivity performance, feeding network configurations, Ku band, microstrip, microstrip antenna arrays, Microstrip antennas, microstrip dielectric loss, planar antenna arrays, planar array topologies, radiating elements, SIW feeding network, SIW technologies, substrate integrated waveguide, substrate integrated waveguides, Substrates, two-level corporate feeding network},
	issn = {1558-4143},
	doi = {10.1109/MAP.2019.2895633},
	author = {E Garcia-Marin and J L Masa-Campos and P Sanchez-Olivares}
}
@article {murbach2017pregnant,
	title = {Pregnant women models analyzed for RF exposure and temperature increase in 3T RF shimmed birdcages},
	journal = {Magnetic resonance in medicine},
	volume = {77},
	number = {5},
	year = {2017},
	pages = {2048{\textendash}2056},
	author = {Murbach, Manuel and Neufeld, Esra and Samaras, Theodoros and J C{\'o}rcoles and Robb, Fraser J and Kainz, Wolfgang and Kuster, Niels}
}
@conference {15_ISMRM_Murbach_3Tpregnant,
	title = {Pregnant Anatomical Models in 3T pTx Body Coils: Evaluation of SAR and B1+ Optimization in Various Imaging Positions},
	booktitle = {23rd Annual Meeting of the International Society for Magnetic Resonance in Medicine, 2015. ISMRM 2015},
	year = {2015},
	month = {June},
	author = {M Murbach and E Neufeld and E Cabot and E Zastrow and J C{\'o}rcoles and W Kainz and N. Kuster}
}
@article {19_Propagation5.6GHzPIER-C,
	title = {Propagation Loss Measurement due to Miscellaneous Phenomenon at 5.6 GHz Band},
	journal = {PIER-C: Progress in Electromagnetics Research C},
	volume = {32},
	year = {2012},
	month = {Oct.},
	pages = {207-220},
	abstract = {In this work, the propagation loss due to diffraction and insertion losses for indoor scenario at 5.6 GHz band are measured using directive antenna and a Vector Network Analyzer (VNA). It is shown that the insertion loss of a metallic door with porthole window varies from several dB due to the propagation loss via the porthole glass up to 50 dB due to the diffraction by the porthole boards when the line between the transmitting antenna and receiving one is outside the porthole glass. It is shown that the insertion loss of a 12 cm brick wall is 4.8 dB for vertical polarization while it is 6.3 dB for horizontal polarization. Also it is shown the diffraction loss due single or double concrete columns depends on the distance between the transmitting and receiving antennas.},
	issn = {1937-8718},
	doi = {10.2528/PIERC12072304},
	url = {http://www.jpier.org/PIERC/pierc32/16.12072304.pdf},
	author = {B Taha-Ahmed and J L Masa-Campos and F Fern{\'a}ndez-Campillo}
}
@article {17_WimaxWIRELESSCOM,
	title = {Propagation Path Loss and Materials Insertion Loss in Indoor Environment at WiMAX Band of 3.3 to 3.6 GHz},
	journal = {Wireless Personal Communication},
	volume = {66},
	number = {2},
	year = {2012},
	month = {Sep.},
	pages = {251 - 260},
	abstract = {The purpose of this study is to characterize the indoor channel for IEEE 802.16 (WiMAX) at 3.3{\textendash}3.6 GHz frequency. This work presents a channel model based on measurements conducted in commonly found scenarios in buildings. These scenarios include closed corridor, wide corridor and semi open corridor. Path loss equations are determined using log-distance path loss model and a Rayleigh multipath induced fading, Normal multipath induced fading or a combination of both. A numerical analysis of measurements in each scenario was conducted and the study determined equations that describe path loss for each scenario. Propagation loss is given for 300 MHz bandwidth. This work also represents the insertion loss of different materials and the obstruction loss due the existence of human beings between the transmitting antenna and the receiving one.},
	keywords = {Indoor propagation, Normal multipath induced fading, Rayleigh multipath induced fading, WiMAX},
	issn = {1022-0038},
	doi = {10.1007/s11277-011-0335-2},
	url = {http://link.springer.com/article/10.1007/s11277-011-0335-2},
	author = {B Taha-Ahmed and J L Masa-Campos and Lalueza-Mayordomo, J M}
}
@article {12_IEEEMWCL_Leal-SevillanoMontejo-GaraiMaolongEtAl_Pseudo-EllipticalResponseFilterSU8,
	title = {A Pseudo-Elliptical Response Filter at W-Band Fabricated with Thick SU-8 Photo-Resist Technology},
	journal = {IEEE Microwave and Wireless Components Letters},
	volume = {22},
	number = {3},
	year = {2012},
	month = {March},
	pages = {105-107},
	abstract = {The design and experimental validation of a pseudo-elliptical response filter at W-Band is presented. A micromachining technique based on the thick SU-8 photo-resist is used to construct the filter. The optimized structure is specially well-suited for the implementation of filters with transmission zeros by means of micromachining techniques, since the extracted poles are implemented by simple stubs without irises. Furthermore, a novel topology based on the use of only three SU-8 layers is presented. This new topology, which includes a novel optimized input/output routing, can be potentially used for the design of high-performance devices with a fast and low-cost production. A fourth-order filter with two transmission zeros has been fabricated (bandwidth 5\%), presenting 1.2 dB of insertion loss. This level of loss is equivalent to the actual state-of-art for micromachined filters at W-band, in spite of the reduced height and the split block in the H-plane used in the presented design.},
	issn = {1531-1309},
	doi = {http://dx.doi.org/10.1109/LMWC.2012.2183861},
	url = {http://ieeexplore.ieee.org/xpl/articleDetails.jsp?tp=\&arnumber=6157647\&contentType=Journals+\%26+Magazines\&sortType\%3Dasc_p_Sequence\%26filter\%3DAND\%28p_IS_Number\%3A6166715\%29},
	author = {C A Leal-Sevillano and Montejo-Garai, J R and Ke Maolong and Lancaster, M. J and J A Ruiz-Cruz and Rebollar, J M}
}
@article {8_ParallelplateIEEE,
	title = {Parallel Plate Patch Antenna With Internal Rectangular Coupling Patches and TEN0 Mode Excitation},
	journal = {IEEE Transactions on Antennas and Propagation},
	volume = {57},
	number = {7},
	year = {2009},
	month = {Jul.},
	pages = {2185-2189},
	abstract = {A parallel plate waveguide antenna is presented with microstrip patches as radiating elements. Rectangular patches are also placed inside the waveguide as coupling field structures from the waveguide to the radiating elements. The connections from the coupling to the radiating patches are made by means of vias. The field propagated along the parallel plate waveguide corresponds to a high order TE mode, creating virtual smaller rectangular waveguides in the parallel plate structure. An antenna prototype has been manufactured and measured. A 60\% efficiency and 27 dBi antenna gain were obtained; with a 6.5\% reflection bandwidth. Nevertheless, the resonant behaviour becomes evident in the radiation pattern measurements.},
	keywords = {Microstrip coupling horizontal lines, parallel plate waveguide, patch antenna, virtual waveguide},
	issn = {0018-926X},
	doi = {10.1109/TAP.2009.2021969},
	url = {http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=\&arnumber=4907131},
	author = {J L Masa-Campos and Klinger, S and Sierra-P{\'e}rez, M}
}
@article {09_IntJRFMiCAE_CORCOLES_PerformanceUslot,
	title = {Performance characterization of wideband, wide-angle scan arrays of cavity-backed U-slot microstrip patch antennas},
	journal = {International Journal of RF and Microwave Computer-Aided Engineering},
	volume = {19},
	number = {3},
	year = {2009},
	pages = {389{\textendash}396},
	abstract = {This work looks at the use of wideband cavity-backed U-slot microstrip antennas in finite phased arrays. This configuration retains the single-patch and single-layer characteristics of conventional microstrip antenna arrays and provides a good impedance matching over wider scan angles when electrically thick substrates are used to improve the frequency bandwidth. The characteristics of finite phased arrays of U-slot rectangular microstrip patches enclosed in cylindrical cavities are analyzed from a validated hybrid methodology based on the finite element method, the modal analysis, and the properties of spherical waves. The results are compared with those obtained using an infinite array model. {\textcopyright} 2008 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2009.},
	keywords = {broadband U-slot patch antenna, cavity-backed microstrip antennas, finite element method, finite phased array, spherical mode expansion},
	issn = {1099-047X},
	doi = {10.1002/mmce.20361},
	url = {http://dx.doi.org/10.1002/mmce.20361},
	author = {J C{\'o}rcoles and Gonz{\'a}lez, M A and Rubio, J and Zapata, J}
}
@conference {05-WT-B-FDSS,
	title = {Proposed FDSS UWB communications system},
	booktitle = {Wireless Technology, 2005. The European Conference on},
	year = {2005},
	month = {Oct},
	pages = {137-140},
	keywords = {440 Mbit/s, channel capacity, Downlink, FCC, FDSS UWB communications system, free space propagation model, Frequency conversion, frequency division spread spectrum, IEEE 802.15.3a channel modeling, IEEE standards, Interference, Phase modulation, Pulse modulation, Radio spectrum management, spread spectrum communication, system downlink capacity, Telecommunication standards, ultra wideband communication, Ultra wideband technology},
	doi = {10.1109/ECWT.2005.1617674},
	author = {Taha-Ahmed, B}
}
@conference {02-WT-B-FDSSSystems,
	title = {Partial overlay of intelligent FDSS on microwave point to point link using subchannel suppression, downlink analysis of the FDSS system},
	booktitle = {Personal, Indoor and Mobile Radio Communications, 2002. The 13th IEEE International Symposium on},
	volume = {2},
	year = {2002},
	month = {Sept},
	pages = {770-773 vol.2},
	keywords = {Base stations, Binary phase shift keying, cells, cellular radio, Directive antennas, diversity reception, Downlink, downlink analysis, downlink capacity, frequency diversity spread spectrum system, intelligent FDSS, intelligent system, Interference, Microwave antennas, microwave links, microwave point to point link, overlay parameters, partial overlay, performance, receiving antennas, spread spectrum communication, subchannel suppression, Telecommunication standards, transmitting antennas},
	doi = {10.1109/PIMRC.2002.1047326},
	author = {Ahmed, B T and Ramon, M C and de Hao Ariet, L}
}
@conference {01_URSIESP_Ruiz-CruzRebollar_Propiedadesdela,
	title = {Propiedades de la matriz de dispersi{\'o}n generalizada de uniones y discontinuidades en gu{\'\i}a de onda},
	booktitle = {Proc. 2001 Simposium Nacional URSI (in Spanish)},
	year = {2001},
	month = {Sept.},
	pages = {9-10},
	abstract = {The Generalized Scattering Matrix (GSM) is an usual way to characterize a waveguide junction. Regardless of the geometry and the technique used to calculate it, the GSM has some properties that are slightly different from the circuital ones due to the presence of evanescent modes. In this paper theseproperties are reviewed and its relation with the GSM of a transversal discontinuity obtained by Mode-Matching (MM) is investigated. In this particular case, the properties can never be used to check that the analysis has been carried out rightly.},
	url = {http://w3.iec.csic.es/ursi/articulos_villaviciosaodon_2001/articulos/178.pdf},
	author = {J A Ruiz-Cruz and Rebollar, J M}
}
@conference {00_EIEC_RebollarRuiz-Cruz_Propiedadesdela,
	title = {Propiedades de la matriz de dispersi{\'o}n generalizada de discontinuidades y uniones en medios de transmisi{\'o}n},
	booktitle = {Proc. I Encuentro Ib{\'e}rico de Electromagnetismo Computacional (in Spanish)},
	year = {2000},
	month = {July},
	pages = {11},
	author = {Rebollar, J M and J A Ruiz-Cruz}
}
